Custom Backspace Chart
October 7, 2009 by admin
Filed under Helpful Info.
In addition to the many standard wheel sizes and back-spacing available “off-the-shelf” from Wheel Vintiques, it is possible to order a number of different style wheels custom-made to your specifications. The accompanying charts show what are the minimum and maximum back-spacing dimensions available in both standard and reverse-style wheels. These are extra-cost options, and due to the custom nature ot the item, not returnable under any circumstances. Custom back-spacing is available only on steel wheels.
Click the image below to view the chart.
Can the artillery wheel be ordered 15 x 7 with 3.75″ back spacing instead of 4.00″?
I would like to know if you all make rally style 1971 Chevelle wheels in 20″, Thanks!
The standard 4″ back space is the minimum that the artillery wheel can be built with.
Quesion: Can I get 16×10 steel wheel, 5 on 4 3/4, with a 5 1/2″ Backspace, and a Corvette rally style center? I noticed that this rim is available with a “Gennie” center, but would rather have the “slotted” look.
Thanks, Alan P.
We sure can, it is the 66 series Chevy Rallye. It would be a custom offset wheel and would take approx 1 week to build.
The 94 Seires Billet Mag-500 is only produced as large as 18”.
Do you build stock wheels for 1949 Cadillac with the clips to mount the sombrero wheelcover?
We do not reproduce the Cadilac OE steel wheel.
I’m interested in the 8 lug OE 16×10 what backspacing is available
I have some original rally wheels from a ‘73 Chevy Monte Carlo
I need to replace the rings and caps. The ring measures 3 inches from the outside top to the bottom inside with a tape measure.
Do you have replacements for these. I believe the wheels are 6 inch
Our part #3002 is a 3″ wide trim ring and will work on large ID wheels with a 13.25″ drop center.
The standard backspace is 5″. But we can custom build that wheels with up to a 7 1/4″BS.